Introduction to the TPEP Anti-Corrosion Steel Pipe Process
Release time:
2020-11-13
Introduction to the TPEP Anti-Corrosion Steel Pipe Process: The outer wall employs a hot-melt wrapping process, where a three-layer anti-corrosion coating is formed by an epoxy resin at the bottom, an adhesive layer in the middle, and a polyethylene layer on the outside. The inner wall is protected using a hot-spray epoxy powder coating method. After the TPEP powder is heated to a high temperature and melted, it is evenly applied onto the pipe surface, creating a steel-plastic composite coating that significantly enhances the adhesion and thickness of the coating, thereby improving its resistance to impact and corrosion. TPEP steel pipes exhibit excellent ductility and integrity, making them convenient to install and operate. They are suitable for jacking pipe installation. Protecting both the inner and outer walls of steel pipes and their fittings is a highly convenient approach.
TPEP Introduction to the anti-corrosion steel pipe process: The outer wall employs a hot-melt wrapping process, with a three-layer anti-corrosion coating consisting of an epoxy resin layer at the bottom, an adhesive intermediate layer, and a polyethylene outer layer. The inner wall is protected by a hot-sprayed epoxy powder coating method. TPEP After being melted by high-temperature heating, the powder is evenly coated onto the surface of the pipe body, forming a steel-plastic composite layer. This significantly enhances the adhesion and thickness of the coating, improving its resistance to impact and corrosion. TPEP Steel pipes have excellent ductility and integrity, and are convenient to install and operate. They can be used for pipe jacking construction. Protecting the inner and outer walls of steel pipes and their fittings is a very convenient method.
TPEP The pipe is a combination of steel and plastic tubing, offering excellent cost-effectiveness. It boasts advantages such as excellent corrosion resistance, strong corrosion resistance, and superior durability against corrosive environments. It can effectively prevent secondary contamination of water quality and plays an important role in improving the quality of water delivered through pipelines. Developed countries have already adopted this technology. 50 For many years, the effect has been evident. Polyethylene and epoxy resin exhibit excellent corrosion resistance.
It is a thermoplastic material with excellent resistance to impact and corrosion. Since it consists of nonpolar molecules, its adhesion to steel pipes is relatively poor and less durable. In contrast, epoxy resin features polar molecules with lighter basic groups, which readily react with steel pipes at certain temperatures, resulting in strong adhesion. However, due to its thermosetting nature, it lacks resistance to impacts.
Therefore, the combination of these materials represents the optimal choice currently available in the anti-corrosion industry. It also constitutes... TPEP The raw-material plastic-coated steel pipe industry began with both internal and external polyethylene coatings. To address the issue of poor adhesion between polyethylene and the steel pipe substrate, an epoxy resin was developed.
Later, TPEP It has evolved into third-generation inner-ring epoxy and outer polyethylene. However, when a single-layer polyethylene is directly bonded to steel pipes, it was eventually upgraded to fourth-generation internally anti-corrosive polyethylene, abbreviated as... TPEP Anti-corrosion steel pipe.
In summary 30 Building on years of corrosion prevention experience, we have introduced production technologies from Russia and Japan, enabling the fourth-generation upgrade and replacement of water supply coated composite steel pipes. T , three out of three letters, PE Representing polyethylene, EP Represents epoxy resin. 2009 Granted a national patent this year, 2010 Awarded the National Torch Program in the year, 2014 Awarded as a National Key New Product this year.
In the same year, it received the Second Prize for China’s Scientific and Technological Progress. This product fills a gap in China by providing a single-coat internal and external anti-corrosion coating for large-diameter underground water pipelines. TPEP It is an anti-corrosion coating. 3ple Yes 3PE Anti-corrosion, three-layer polyethylene composite structure anti-corrosion coating 3LPE : To make the pipeline “ Coating ” More durable.
TPEP The external anti-corrosion coating of long-distance oil and gas pipelines serves as a critical barrier to ensuring pipeline safety. As energy demand continues to rise in emerging economies, pipeline construction has entered a peak period, thereby driving the advancement of anti-corrosion coating technologies for long-distance pipelines. Currently, the primary external anti-corrosion coatings used for pipelines include petroleum asphalt, coal tar enamel, fusion-bonded epoxy powder, three-layer polyethylene coatings, and three-layer polypropylene coatings.
Recommended News
Advantages of anti-corrosion steel pipes
2022-09-19
What is TPEP anti-corrosion steel pipe?
2022-09-07
Let’s take stock of TPEP’s major advantages!
2022-08-18
Shisheng Tube-material Antiseptic
HOT LINE::
ADDRESS:
Puwacheng Industrial Development Zone,
Yanshan County, Hebei Province