Precautions for Anti-corrosion Construction of IPN8710
Release time:
2020-11-22
The IPN8710 anti-corrosion coating consists of two components: one is the base material—comprising resin and an initiator—and the other is the underlying substrate, which is made up of reactive monomers and a catalyst. This coating exhibits exceptionally strong adhesion, excellent flexibility, and outstanding resistance to acids, alkalis, and salts, making it an excellent medium for corrosion resistance. Furthermore, it enhances the coating’s toughness, strength, adhesion, impermeability, and chemical inertness, thereby improving the overall performance of the film. It represents a novel polymer blending technology.
IPN8710 anti-corrosion Coating agent By two groups Coating agent Composition. One group consists of basic materials. resin and initiator; the other is the underlying substrate, composed of reactive monomers and a catalyst. This... Coating agent It boasts exceptionally strong adhesion, excellent flexibility, and resistance to acids, alkalis, and salts, making it an outstanding corrosion-resistant medium. This material further enhances the coating’s toughness, strength, adhesion, impermeability, and chemical inertness, thereby improving the overall performance of the film. It represents a novel polymer blending technology.
One, 8710 anti-corrosion Coating agent The comprehensive performance is as follows: 1. Simple surface treatment; 2. Excellent corrosion resistance; 3. Reasonable cost-performance ratio.
II. Homework Precautions:
( 1) At Use 8710 anti-corrosion Coating agent To carry out Homework Before coating, the surface must be thoroughly cleaned to remove any rust, oil stains, or other contaminants. If the surface is made of steel, weld seams should be smooth and free of burrs. Typically, after cleaning is completed... Within 12 hours, a primer must be applied to prevent secondary rusting.
( 2) On the cement surface Use At that time, first apply a primer as the substrate, and then... Mix groups A and B together, add filler, and thoroughly stir to replace the putty. Smooth the cement wall surface, and after 24–36 hours, sand it with sandpaper.
( 3) The best for painting Homework The condition is temperature. 5–35℃, relative humidity ≤ 75%. Alternatively, in conditions of rain, fog, or dense fog, the surface temperature of the coated object must be at least 3℃ higher than the dew point temperature. Prohibited under heavy snowfall and dusty conditions. Homework 。
( 4) Paint can be applied by brushing, rolling, or spraying. Due to the differences... Homework Method for Coating agent has different viscosity requirements; therefore, it should... Use A special diluent to adjust Coating agent viscosity. Absolutely do not dilute with water, alcohol, banana oil, or gasoline.
( 5) 8710 anti-corrosion is “chemically reactive.” Coating agent It is packaged in two parts: the first part contains the resin and initiator, while the second part contains the active monomer and catalyst. Therefore, Use Beforehand, the two ingredients must be weighed in the prescribed important proportions, and then... Homework Mix, stir, and cure according to the specified time. 30 minutes. Please adhere strictly to the specified proportions.
( 6) Paint Use Afterward, the lid of the packaging container must be tightly sealed; otherwise, it could easily be corroded by moisture, alcohol, and water.
( 7) After coating at room temperature, allow it to dry at room temperature for 7–10 days. Use 。
( 8) Homework Tool Use After completion, clean with a专用 diluent.
( 9) Homework In addition, when opening the container, do not use a hammer to strike it, as this could cause a fire.
( 10) 8710 anti-corrosion Coating agent The shelf life is 12 months. After 12 months, all technical indicators should be checked. If they meet the technical requirements, it is still possible to... Use 。
Recommended News
Advantages of anti-corrosion steel pipes
2022-09-19
What is TPEP anti-corrosion steel pipe?
2022-09-07
Let’s take stock of TPEP’s major advantages!
2022-08-18
Shisheng Tube-material Antiseptic
HOT LINE::
ADDRESS:
Puwacheng Industrial Development Zone,
Yanshan County, Hebei Province